Ending The Measurement - "Sentrysuite Connected" And "His Connected; Mode - CareFusion Vyntus WALK Instrucciones De Uso

Ending the measurement - "SentrySuite connected" and "HIS connected"

Mode

Version 05.00 • 06-06-2017
All manuals and user guides at all-guides.com
If USB Tethering option is activated (see chapter "Settings") you will first be
asked to connect the tablet with the PC via USB cable. As soon as the connection
is established, following window appears:
Tap the "Return" button on your tablet to return to the report screen and
proceed as described above.
If "USB Tethering" option is activated (see chapter "Settings"), you will be
asked to reconnect the tablet with the PC via USB cable and to activate USB
Tethering before proceeding (applies to "SentrySuite connected" mode, only).
After the measurement, a patient database appears automatically. Via WLAN,
the measured values will now automatically be transferred and saved in the
SentrySuite database or in the hospital information system (HIS).
YOUR DATA HAS BEEN TRANSMITTED SUCCESSFULLY
After successful data transmission, the message „Your data has been
transmitted successfully" appears.
Instructions for Use Vyntus WALK
Tap to activate USB tethering.
SentrySuite database
Page 35/332