CareFusion Vyntus WALK Instrucciones De Uso página 17

Version 05.00 • 06-06-2017
All manuals and user guides at all-guides.com
NETWORK SETTINGS
To activate the "USB Tethering" option, tap on the OFF/ON switch. If USB
Tethering option is activated, see option "b)" below for details on how to
create a report network folder.
To create a report network folder, tap the "Report Network Folder" field.
a) USB Tethering option deactivated
The REPORT NETWORK FOLDER
In this folder, the reports generated right after the measurement will
automatically be saved. With tapping <Test connection>, a test file will be
created and saved in the report network folder just created.
b) USB Tethering option activated
The REPORT NETWORK FOLDER
In this folder, the reports generated right after the measurement will
automatically be saved. With tapping <Test connection>, a test file will be
created and saved in the report network folder just created.
ABOUT
In the "Activation" field you can activate your device by means of an
activation code.
The "Service" section contains information on the Software and the
Manufacturer and allows to activate/deactivate the Extended Settings (see
chapter "Activate Extended Settings").
Instructions for Use Vyntus WALK
window appears:
Enter the "IP Address" (e.g.
"192.168.42.101") you want
the folder to be saved to.
Enter the Domain (optionally)
and the name of the folder.
Enter the name of the
authorised user and the
respective password.
window appears:
The "IP Address" field is
filled automatically.
The IP Address entered
needs to be permanently
set in the network adapter
once. This requires a USB
connection between tablet
and PC.
Enter the Domain (optionally)
and the name of the folder.
Enter the name of the
authorised user and the
respective password.
Page 17/332