Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.
If the inner flange is removed, install it on the
spindle with its recessed side facing the circular saw
blade. If the flange is installed incorrectly the flange will
rub against the machine.
1
2
3
► 1. Hex socket bolt (left-handed) 2. Outer flange
3. Circular saw blade 4. Inner flange 5. Spindle
6. Recessed side
Installing the blade
CAUTION:
Make sure to install the circular
saw blade so that the direction of the arrow on the
blade matches that on the blade case. Failure to do
so may result in personal injury and cause damage to
the tool and/or the workpiece.
To install the circular saw blade, perform the following
steps:
1.
Mount the circular saw blade carefully onto the
inner flange. Make sure that the direction of the arrow
on the circular saw blade matches the direction of the
arrow on the blade case.
► 1. Arrow on blade case 2. Arrow on circular saw
blade
4
6
1
2
2.
Install the outer flange and hex socket bolt, and
then use the hex wrench to tighten the hex socket bolt
counterclockwise securely while pressing the shaft lock.
2
1
5
► 1. Hex socket bolt (left-handed) 2. Outer flange
3. Circular saw blade 4. Inner flange 5. Spindle
6. Recessed side
3.
Return the blade guard and center cover to its
original position. Then tighten the hex bolt clockwise to
secure the center cover.
4.
Pull and turn the stopper pin in an unlocked posi-
tion to release the carriage from the raised position.
Lower the carriage and check that the blade guard
moves properly.
CAUTION:
spindle before making cut.
Connecting a vacuum cleaner
When you wish to perform clean cutting operation, con-
nect a Makita vacuum cleaner to the dust nozzle (upper
dust port) using a front cuff 24 (optional accessory).
► 1. Front cuff 24 2. Hose 3. Vacuum cleaner
22 ENGLISH
4
3
6
Make sure shaft lock has released
1
3
5
2
Tabla de contenido
