Door Features; Tilt-Out Freezer Door Bin; Chilled Door Bin; Door Rails Or Bins - KENMORE ELITE W10168300A Manual De Uso Y Cuidado

Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word "Accessory." Not all accessories will fit all models.
If you are interested in purchasing one of the accessories, please
call the toll-free number on the cover or in the "Accessories"
section.

Tilt-out Freezer Door Bin

(on some models)
To Remove and Replace the Bin:
1. Remove the bin by pulling out on the tabs behind the basket
to release it from the door liner.
2. Replace the bin by aligning the tabs with the buttons on the
sides of the door liner. Firmly snap the tabs onto the buttons
as shown.

Chilled Door Bin

(on some models)
Cool air from the freezer is directed to the door bin directly
beneath the vent.
NOTE: The dairy compartment and can rack are not chilled.
Chilled Door Bin Control
The chilled door bin control is located on the left-hand side of the
refrigerator compartment.
Style 1:
All manuals and user guides at all-guides.com

DOOR FEATURES

Style 2:
The door rails or bins may be removed for easier cleaning.
To Remove and Replace the Rails or Bins:
1. Remove the rails or bins by pushing in slightly on the front of
2. Replace the rails or bins by aligning the ends of the brackets
To Remove and Replace the Rails:
1. Remove the rails by pulling straight up on each end of the rail.
2. Replace the rails by sliding the shelf rail into the slots on the
Turn the control clockwise (right) to reduce the flow of cold air
to the bin and make it less cold.
Turn the control counterclockwise (left) to increase the flow of
cold air to the bin and make it colder.
A
A. Chilled door bin control
Slide the control to the left to reduce the flow of cold air to the
bin and make it less cold.
Slide the control to the right to increase the flow of cold air to
the bin and make it colder.

Door Rails or Bins

(on some models)
Snap-On Door Rails or Bins
the bracket while pulling out on the inside tab. Repeat these
steps for the other end of the rail or bin.
with the buttons on the sides of the door liner. Firmly snap
bracket onto the tabs above the shelf as shown.
Drop-In Door Rails
door and pushing the rail straight down until it stops.
19