Wiring Connection; Door Removal, Leveling And Alignment - KENMORE ELITE 106.5116 Serie Manual De Uso Y Cuidado

Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.
NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the
refrigerator and freezer doors. If door removal is necessary, see the instructions below.
IMPORTANT: Before you begin, turn the refrigerator control OFF or turn cooling off. Unplug refrigerator or disconnect power.
Remove food, the ice storage bin (on some models), and any adjustable door or utility bins from doors.
TOOLS NEEDED:
Bubble level, Phillips screwdriver, ³⁄₁₆ " hex key, ¹⁄₄ " hex-head socket wrench, ¹⁄₄ " and ⁵⁄₁₆ " open-ended wrenches or adjustable wrench,
internal star drive or ³⁄₈ " hex-head socket wrench
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
4
Top Left Hinge
A A
A. Do Not Remove Screws.
3

Wiring Connection

A B C D E
A. P-clamp
B. Routing Plate
C. Electrical Housing
D. Wiring Clip
E. Grommets
F. Wiring Plugs
2
Water Dispenser
Tubing Connection
A
A
A. Face of Fitting
6
All manuals and user guides at all-guides.com

Door Removal, Leveling and Alignment

5
A A
F
WARNING
Electrical Shock Hazard
Door Removal
1
Base Grille
Doors must be
open to 90˚
6
Top Right Hinge
A
A
A. Do Not Remove Screws.
Bottom Hinges
7
(Left and Right)
8
Leveling
A
B
Raise Lower
C
A. Bottom Hinge
B. Leveler Bracket
C. Leveling Foot
9
Door Alignment
(Bottom Right Hinge)
Raise
A
Lower
A. Alignment Screw