Baby Unit - Reer BABYPHON NEO Manual Del Usuario

lEGEND:
Channel selection switch /
main switch .01
Temperature-Display .02
Status LED .03
Microphone .04
Temperature-Sensor .05
Antenna .06
Battery compartment .07
DC power supply socket .08
RECOmmENDATION fOR
lOCATION:
NOTE:
Always place the device in an up-
right position in order to ensure
best possible transmission.
All manuals and user guides at all-guides.com

Baby Unit

1
2
3
4
5
• Always place the baby unit out of reach of the child (minimum distance 1 metre).
• Never place the baby monitor in the baby's or child's bed or rather in the playpen.
• Always place the device in an upright position in order to ensure best possible transmission.
• Do not cover the Temperaturesensor
02. Check readiness for operation:
As soon as the device is ready for operation, the green sta-
tus-LED starts flashing every 2 seconds. Now, the device is in
standby-mode. As soon as the highly sensitive microphone re-
alises a noise, the device starts transmitting and the LED lights
up continuously.
Switch-off: To switch off turn the main switch to the „AUS" position.
01. Switch-on / choose a channel:
Switch on the baby unit by selecting either the channel A or B
using the main switch. In order to avoid disturbances due to
other radio sources, there are 2 channels available from which
you can choose.
03. Temperature display
With the device switched on, the display of the baby unit shows
the current room temperature.
6
7
8
page 13