Parent Unit; Battery Compartment - Reer BABYPHON NEO Manual Del Usuario

Parent unit

1
2
3
4
5
02. Control lamps:
With the parent unit switched on, the status-LED lights up in
green. As soon as a sound is registered from the baby unit,
transmission to the parent unit takes place. The louder the recei-
ved signal is the more LEDs light up, independent of the volume
set on the device.
Switch-off: To switch off turn the main switch to the „AUS" position.
page 14
All manuals and user guides at all-guides.com
01. Switch-on / Choose a channel:
Switch on the parent unit by selecting the same channel as you
have chosen for the baby unit, using the main switch.
03. Adjusting the volume on the parent unit:
Set the desired volume by turning the volume control on the
front of the parent unit clockwise (clockwise = turning the volu-
me up, counterclockwise = turning the volume down).
lEGEND:
01.Status LED
6
02. Volume Control
03. Status LED
04. Channel selection switch /
7
main switch
05. Speaker
06. Antenna
8
07. Belt clip

08. Battery compartment

9
09. DC power supply socket
NOTE:
Should a high-pitched beep be
heard while putting the devices
into operation, then both devices
are still too close together.
NOTE:
Always place the device in an up-
right position in order to ensure
best possible transmission.
ATTENTION:
In the case of arising disturbances
or rather poor reception, please
immediately change the channel
on both devices.