Capacity Labels - Mettler Toledo IND310drive Manual De Instalación

Jumpers/LEDs
LED 1
LED 3
LED 4
LED 5

Capacity Labels

In accordance with regulations for specific locations, capacity labels should be
displayed on the front of the IND310drive terminal—one for each scale (see Figure
2-14). Max, min, and e information should be included on the labels. Written
information must be a minimum of 2-mm or 0.08-in. high characters.
On Off
X COM 2 emulates RS-422
X Power is supplied to main PCB
Power off. If unit is plugged in, check main power, power
X connections, proper seating of board and fuses, before
contacting service
X X Flashing: Power on, load cell communication OK
Ethernet link connected
Ethernet link active
N/A
Figure 2-14: Capacity Labels for a Two-Scale System
IND310drive Installation Manual
Description
2-17