General Notes For Installing And Maintenance Technicians, And Users - Fondital HWF 20 Manual Del Usuario

Ocultar thumbs Ver también para HWF 20:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

1.

General notes for installing and maintenance technicians, and users

This manual is an integral and essential part of the product. It shall be supplied by the installer to the user who shall keep it carefully to
consult it whenever necessary.
This manual shall be supplied together with the product in case the latter is sold or transferred to others.
After installation, the installer must inform the user about the system operation.
When receiving the product, make sure it is complete and in good state, i.e. without damages occurred during transport and handling: do
not install damaged and/or faulty products.
Before installation, ensure the product features are suitable for its use in the system.
This product has been manufactured to be connected to a domestic water heating system and/or room heating
systems.
!
Any other use shall be considered unsuitable and dangerous for people, animals, and/or property.
The product shall be installed by a company qualified for thermo-sanitary systems installations complying with
the requirements set by the current legislation.
!
The installation shall be carried out in accordance with the rules in force in the installation country and the
instructions provided by the manufacturer herein.
The installing company is required by law to issue a declaration of conformity with the current Standards
concerning the performed installation.
Whoever commissions the product installation to an unqualified company will be subject to administrative
sanctions.
Use original accessories supplied by the manufacturer only.
!
Use exclusively heat transfer fluids for power solar systems supplied by the manufacturer.
The manufacturer will bear no contractual and tortious liability for damages caused by installation, use, or maintenance mistakes, or
non-compliance with the Standards in force in the installation country and the manufacturer instructions.
After product installation properly dispose of the package: all materials are recyclable, so they must be disposed of in the
suitable separate collection areas.
The packages can be dangerous: keep them out of the reach of children.
In case of product damages and/or operation faults, disable it and do not carry out any repairing or direct action
on it: contact skilled personnel.
!
The product must be repaired (if necessary) using original spare parts supplied by the manufacturer.
It is good practice to check at regular intervals the power solar system fluid pressure.
During standard operation the pressure must be within a range of 3.5 to 4.5 bars.
!
If this is not the case, contact an Authorised Service Centre or skilled personnel to carry out the maintenance.
Strictly follow the scheduled maintenance intervals specified in this manual under the relevant section.
A correct maintenance allows obtaining the best product performances, with respect to the environment, and
!
under safe conditions for people, animals and/or things.
Incorrect and irregular maintenance can be a source of danger for people, animals and property.
Have the product maintenance and any repair carried out by skilled personnel in compliance with the current laws.
The user is strongly advised to have the system serviced and repaired by one of the Manufacturer's fully qualified and authorised Service
Centres.
Failure to comply with what specified above can compromise the product safety and endanger people, animals, and/or things.
The manufacturer will bear no contractual and tortious liability for failure to comply with the instructions above.
21
EN
Tabla de contenido
loading

Tabla de contenido