Assembly And Use Of The Carrycot - Emmaljunga NXT 90 Manual De Instrucciones

Assembly and use of the carrycot

1
2
3
4
5
84
All manuals and user guides at all-guides.com
ASSEMBLY OF THE CARRYCOT
• To assemble the carrycot pull the metal bar along the bottom of
the base until it clicks into one of the plastic pieces.
• Pull one side at a time on each metal support so that both sides
click in the plastic pieces.
• Repeat the same steps with the other end of the carrycot.
• This will set the carrycot into position.
WARNING
• Before using the carrycot ensure that the metal supports are
clicked into all four parts on the botton of the base and the carry-
cot frame is held firmly in place.
• Push back the backrest to the reclining position.
• Remove the mattress from the plastic bag (discard safely) The
bottom of the carrycot is made of wood.
• Insert the mattress.
WARNING
• Do not use additional mattresses in the carrycot. Use only the
Emmaljunga original mattress that comes with the pram.
• Risk of suffocation. Do not let children play with plastic bags.
• Press both buttons on the inside of the hood and pull it up.
• Attach the apron using the velco straps on each side of the
carrycot
NXT 90 v 1.2