Operation - Bartscher M 10110g Manual De Instrucciones

•
Should the combi steamer be installed on table of stainless steel or other combi
steamer, it is not recommendable, to use the higher insertions than those, at which
the user can look into the container.
•
For safety reasons, after installation of the device, the label
container! Danger of burns! ", which is located in the package must be attached to
the combi steamer at a height of 1600 mm from the floor.

5.2.2 Operation

•
Clean the oven and its accessories carefully before use (see 6 „Cleaning and
maintenance").
•
Before activation, ensure the device has been installed properly, stably and rests level,
and also examine the electrical connection and connection to gas and water lines.
CAUTION!
Before cooking/baking preheat the device to a temperature 20-25% above the
desired cooking/baking temperature. After this temperature is reached, place
the food product inside the compartment. Next, lower the temperature to that
desired for preparing the desired food product.
- 64 -
„Hot liquid in