First Use - Nevadent DAZD 3.7 LI B2 Instrucciones De Uso

First use

Before starting to use the appliance, check that it is in fault-free condi-
tion. Otherwise, it must not be used.
1) Insert the plug into the power socket.
2) Before initial use, clean the new brush heads
3) Open the lid
brush heads on the brush holders. Close the lid
4) Place the handset on the charger
pin on the base.
5) Allow the handset to charge for around 14 - 16 hours before
using it for the first time. The charge indicator
the handset lights up red during the charging process.
6) Use the handset repeatedly without charging the battery until
the performance becomes noticeably weaker or the toothbrush
stops working and the charge indicator
charge the battery for 14 - 16 hours.
When the appliance is fully charged, the charge indicator
lights up green.
7) Charge and discharge the toothbrush completely 3 times.
The battery will then have reached its full capacity.
8) You can now leave the handset in the charger
use, so as to always have full power available.
■ 10 │
US-EN
of the charger
with fresh water.
and place the replacement
again.
so that it slides onto the
on the front of
blinks red. Then re-
after every
DAZD 3.7 Li B2