Tabla de contenido
1. Oil filler cap
1. Bouchon de remplissage d'huile
1. Tapa del orificio de llenado de aceite
1. Dipstick
3. Minimum level mark
1. Jauge
3. Repère de niveau minimum
1. Varilla
3. Marca de nivel minimo
2. Maximum level mark
2. Repère de niveau maximum
2. Marca de nivel máximo
Engine oil
Engine oil level measurement
1. Place the machine on a level place.
2. Warm up the engine for several minutes
and stop it.
3. Remove the oil filler cap and wipe the dip-
stick off with a clean rag. Insert the dip-
stick in the filler hole without screwing it
in.
NOTE:
Wait a few minutes until the oil level settles be-
fore checking.
4. Remove the dipstick and inspect the oil
level.
5. The oil level should be between the maxi-
mum and minimum marks. If the level is
low, add oil to raise it to the proper level.
CAUTION:
Be sure no foreign material enters the crank-
case.
8-13
EBU00266*
Capítulos
Tabla de contenido
Solución de problemas
