start the engine. To manually choke and start the
inverter, follow these steps:
1. Loosen the screws and remove the maintenance
cover.
3. Turn the choke lever to the "CHOKE" (right)
position.
English
21
4. Turn the
to the
5. Flip the
switch
6. Pull the
slowly
is
felt
pull
8.
As the engine starts to roll over, move
the choke lever to the "RUN"(left) position.
fuel valve
"ON"(l)
position.
engine
to the
"RUN"(l)
position.
starter cord
until
resistance
and then
rapidly.
Customer Service: 1-844-FIRMAN1Page