Idiomas disponibles
Idiomas disponibles
MOTION DET
MOTION DET
DETECT SENSE
BLOCK DISP
OFF
MOTION AREA
ON
AREA SEL
1 / 4
TOP
BOTTOM
LEFT
RIGHT
RETURN
CAMERA ID
CAMERA ID
CAMERA
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-#$%&?
()_`.:;<=> @^*./^*X+/
CHR1 CHR2
CLR POS
RETURN
SYNC
Video synchronization displayed INT (Internal).
CAMERA RESET
Reset camera to default values.
Returns you to the previous menu.
BACK
Takes out of the menu
EXIT
Saves settings. You must click this setting to save any options
SAVE ALL
you changed in this menu or the camera will lose all your chan-
ges if it loses power.
All manuals and user guides at all-guides.com
There are two ways for users to set up motion detection.
DETECT SENSE - Slide bar sets sensitivity of motion detection to 0 or 255 (maximum
sensitivity).
111
BLOCK DISP - Settings are ON, OFF and ENABLE.
When ON is selected, the camera will show a mosaic in the image when a motion is
detected.
When ENABLE is selected, the user will see a grid pattern on screen. Using the mini-
000
joystick, each square on the grid can be selected/deselected for motion detection.
000
When nished move the cursor to the lower right corner, hold and release. The grid will
000
disappear and this menu will return.
000
The camera will show a square in the image. When a motion is detected, the square
ashes.
MONITOR AREA - This option works with the AREA SEL selections, described below. It
enables the "areas" or turns them o .
AREA SEL - Lets you select up to 4 rectangular sections (1/4, 2/4, 3/4 and 4/4), de ned
by the TOP, BOTTOM, LEFT and RIGHT slide controls.
Camera ID shows a name on the screen as chosen.
Use Up/Down/Left/Right buttons to move around. Keep CHR1 setting. CLR will
clear info. POS allows position change.
