NEC MD301C4 Guía De Referencia Rápida página 6

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE
PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO
FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET.
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Power Cord Important Information
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
When you use this Display in North America, you should use a North America Hospital Grade power cord.
Plug Type
Plug Shape
Country
Voltage
NOTE: This product can only be serviced in the country where it was purchased.
Intended Use
MD301C4 is intended to be used for displaying and viewing of digital images for diagnosis by trained physicians.
Caution: MD301C4 cannot be used for a life-support system.
This unit is designed as component of a fi nal system which is in compliance to IEC60601-1-1 requirements.
MD301C4 must not be used in digital mammography.
Safety Precaution
The unit is for exclusive interconnection with IEC60XXX certifi ed equipment outside of patient environment and IEC 60601-1
certifi ed equipment inside the patient environment.
• Equipment connected to digital interfaces must comply with the respective IEC standards (e.g. IEC 60950 for data processing
equipment and IEC 60601-1 for medical equipment).
• This device comply with EN60601-1-2, to minimize the interference from other equipment, a minimum 0.5 m distance shall be
kept form other potential electromagnetic sources, such as the Cell Phone.
• To reduce the risk of electric shock, make sure power cord is unplugged from wall socket. To fully disengage the power to the
unit, please disconnect the power cord from the ac outlet. Do not remove cover (or back). No user serviceable parts inside.
Refer servicing to qualifi ed service personnel. The AC outlet shall be readily available and accessible.
North America Customers
Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle marked "Hospital Only"
or "Hospital Grade". That signal input port need to be connected properly and that any unused signal input port shall not be
accessible for the patient to contact in the patient area after the LCD is integrated into a medical system.
Federal law restricts this device to sale by or on the order of a licensed healthcare practitioner.
European Customers
Unpacking, Installation and calibration of this display should only be done by authorized and trained personnel. Any installation
done by a non-authorized person is done under his own risk and we accept no responsibility in any device malfunctioning. To
secure full functionality of this display, only NEC approved display controller models for connection with the fi nal system must be
used.
Medical Imaging
MD301C4 is designed for 2560 x 1600 medical imaging.
MD301C4 paper manual.indb Sec1:2 MD301C4 paper manual.indb Sec1:2
European
North America
Continental
(green dot
and tag label)
U.S.A./Canada EU (except U.K.)
120 230
WARNING
CAUTION
U.K.
U.K.
230
English-2
Chinese Japanese
China Japan
220 100
1/25/11 11:04:30 AM 1/25/11 11:04:30 AM