Tabla de contenido
Idiomas disponibles
Idiomas disponibles
22/23
Maximum air inlet pressure to gun 6-8 bar
3.2. Pressure Version
Pressure fed unit (hereinafter the Gun) with Tip and Air Nozzle of the type described in the
packaging.
Maximum air inlet pressure to gun 6-8 bar
4. Components
1
Air nozzle
2
Head packing gland
3
Trigger
4
Valve packing gland
5
Air inlet
6
Air valve
7
Product regulator
8
Spray width regulator
9
Product filter
10
Non drip plug
11
Air flow regulator
12
Product Cup
5. Warnings
· Before putting the unit into operation, and especially after each cleaning and/or repair operation,
a check must be made that the gun components are securely tightened and that the air and/or
product hoses are airtight (no air leaks). Faulty parts must be replaced or repaired as
appropriate.
· The gun is easy to handle thanks to its design and the simplicity of its mechanisms. No special
training is required for handling the gun. Use the gun according to the operating, maintenance
and safety instructions indicated in this manual and follow the application methods indicated
to obtain the required quality of finish.
· Before putting the unit into operation, we recommend you to clean the gun as this has been
subjected to functional tests and before packaging it is treated internally with a protective
coating, some of which may still remain. Apply thinner to eliminate this. Remove any residual
grease applied during assembly.
· Ensure that the products to be applied are chemically compatible with the components these
come into contact with (aluminium, stainless steel, polythene and acetylene resin).
12
9
1
2
3
1 1
ENGLISH
10
4
8
7
6
5
Tabla de contenido
