1. Warning
Before starting the unit you must read, take into consideration and comply with all the indications
described in this Manual.
This manual must be kept in a safe place, accessible to all users of the unit.
The unit must be started and handled exclusively by personnel instructed in its use and must be
employed only for the purpose for which it was designed.
Likewise, accident prevention standards, regulations, work centre directives and current legislation
and restrictions must be taken into consideration at all times.
The SAGOLA logotypes and other SAGOLA products mentioned in this manual, are registered
trademarks or brand names of the company SAGOLA S.A.
2. Introduction
This unit belongs to the family of devices designed to spray products with compressed air with
a spray gun, providing a high level of product transfer (T > 65%) and excellent quality finish, as
well as low levels of contamination.
The equipment consists of the following:
_ Spray gun
_ Accessory wrench
_ Cleaning brush
_ Instruction manual
_ Case
3. Technical details
Net weight:
Gravity Version...........................................................................................430 to 575 g.
Pressure Version..................................................................................................380 g.
Maximum operating temperature of 50ºC.
Recommended working pressure not in excess of 2 bar (measured at the air inlet and recorded
in this).
Air consumption according to Nozzle Table
Community directive complied with
Explosive atmosphere (Atex)
(**) Non electric gun in explosion hazard areas (ATEX) must have the earthing connections and/or static-free feed hoses.
3.1. Gravity Version
Gravity fed unit (hereinafter the Gun) with Tip and Air Nozzle of the type described on the packaging.
Product cup with a capacity of 0.65 litres, fitted with an anti-drip plug, product filter and device
for collecting drained product. A 0.20 litre cup is also an option.
94/9
II 2G X
ENGLISH