For Models With Water Dispenser; Intended Use - Beko CN160120 Manual Del Usuario

Important instructions for safety and environment
Take care not to trap the
•
power cable.
1.1.1 HC warning
If the product comprises a
cooling system using R600a
gas, take care to avoid
damaging the cooling system
and its pipe while using and
moving the product. This gas
is flammable. If the cooling
system is damaged, keep the
product away from sources
of fire and ventilate the room
immediately.
The label on the inner
C
left side indicates the
type of gas used in the
product.
1.1.2 For models with
water dispenser
Pressure for cold water
•
inlet shall be maximum 90
psi (6.2 bar). If your water
pressure exceeds 80 psi
(5.5 bar), use a pressure
Refrigerator/ User manual
limiting valve in your mains
system. If you do not know
how to check your water
pressure, ask for the help of
a professional plumber.
If there is risk of water
•
hammer effect in your
installation, always
use a water hammer
prevention equipment in
your installation. Consult
Professional plumbers if you
are not sure that there is no
water hammer effect in your
installation.
Do not install on the hot
•
water inlet. Take precautions
against of the risk of
freezing of the hoses. Water
temperature operating
interval shall be 33°F
(0.6°C) minimum and 100°F
(38°C) maximum.
Use drinking water only.
•

1.2. Intended use

This product is designed for
•
home use. It is not intended
for commercial use.
5 /36EN