Tristar BL-4426 Manual De Instrucciones página 16

• A fire may occur if the appliance is covered or touching flammable material including
curtains, draperies, walls and the like when in operation.
• Do not clean with metal scouring pads. Pieces can break off the pad and touch
electrical parts, involving a risk of electrical shock.
• Extreme caution should be exercised when using containers constructed of other
material other than metal or glass.
• Do not store any materials other than manufacturers recommended accessories in this
unit when not in use.
• Do not place any of the following materials inside the unit: Paper, cardboard, plastic and
the like.
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY!
All parts of the blender are to be thoroughly cleaned before being used for the first time.
(see Section: Cleaning).
Take out the required length of cable from the cable tidy on the base of the blender and
connect the device to the mains supply.
Assembling the Glass Jar:
Put the rubber sealing ring (4) on the inner edge of the blade unit (5).
Put the blade unit with sealing ring into the cup base (6).
Insert the assembled Cup Base onto the bottom of the glass jar and secure tightly.
Mount the glass cup (3) onto the cup base unit and tune the cup base unit, and turn
clockwise until glass jar locks into place.
Mount the Measure Cup (1) onto the Lid (2).
Secure the Lid onto Glass Jar and press down.
SAVE THESE INTRUCTIONS
Before first use...