Special Programming; Dialing Mode Toggling (Tone/Pulse); Ring Volume Setting; Ring Type Setting - Intelbras TH 10 Guia De Instalacion

Special programming

This kind of programming is performed via the
FLASH/SET programming key.
Programming
key
Note: Keep the phone on the hook for at least 5
seconds, to perform these functions.

Dialing mode toggling (Tone/Pulse)

To change dialing mode from Tone to Pulse or vice-
versa, keep the phone on the hook and follow this
procedure:
press FLASH/SET programming key once;
for Pulse, press keys 3 2 * and then press the
programming key, or
for Tone, press keys 3 2 # and then press the
programming key.

Ring volume setting

There are 4 ring levels that can be set in a circular
way, i.e., after selecting the lower level, the next
level of the sequence becomes the higher level.
To change ring volume, keep the phone on the
hook and follow this procedure:
press FLASH/SET programming key once;
to reduce the volume, press keys 2 3 *, or
to increase the volume, press keys 2 3 #;
to conclude, press the programming key again.

Ring type setting

There are some ring types that can be selected in
a circular way.
To change the ring type, keep the phone on the
hook and follow his procedure:
press the FLASH/SET programming key once;
press keys 2 1;
23