Intended Use - DeWalt D28474 Manual De Instrucciones

A. Trigger Switch E. Spindle
B. Lock On Button F. Soft Mount
C. Spindle Lock G. Rubber Bumper
D. Side Handle
FIG. 1
A
E
F
D

INTENDED USE

Large angle grinders and large angle sanders are designed for heavy
material removal in extended use applications.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
This heavy-duty angle grinder and sanders are professional power
tool. DO NOT let children come into contact with the tool. Supervision
is required when inexperienced operators use this tool.
Features (Fig. 1)
SWITCH
The tool is controlled by a trigger switch (A). A lock-on button (B)
provides increased comfort in extended use applications.
G
C
B
ROTATING GEAR CASE (D28474, D28476, D284076, D28493,
D28494, D28496)
For applications in which a tool will be dedicated for uses in edge
grinding and finishing work, the gear case may be rotated 90° left
or right of its original position. See Rotating the Gear Case under
Assembly and Adjustment for instructions on rotating the gear
case.
MULTIPLE SIDE HANDLE POSITIONS
The side handle can be properly positioned in five lo ca tions based on
personal preference and application. The side handle must be used
at all times to maintain proper control of the tool.
RUBBER BUMPER
The gear case rubber bumper (G) may wear with use. The bumper
can be replaced and is available at extra cost from D
centers and D WALT dealers. Replacement should be performed by
E
D WALT authorized service centers or qualified service personnel.
E
SPINDLE LOCK
The spindle lock pin is provided to prevent the spindle from rotating
when installing or removing wheels. Operate the spindle lock pin only
when the tool is turned off and unplugged from the power source. To
engage the lock, depress the spindle lock button (C) and rotate the
spindle until you are unable to rotate it further.
NOTE: Never depress the spindle lock button while the grinder is
running. Never turn on the grinder while the spindle lock button is
depressed. Damage to your tool may result.
SOFT MOUNT
The grinder is equipped with a soft mount, enabling easy wheel
installation and removal.
Accessories and Attachments
It is important to choose the correct guards, backing pads and
flanges to use with grinder accessories. See the chart on pages
27–29 for information on choosing the correct accessories.
26
WALT service
E