Changing Over The Quick-Tension Chain Wheel (18); Chain Maintenance Table; Help In Case Of Malfunction - AL-KO EKS 2000/35 Manual De Instrucciones

GB
8.6 Changing over the quick-tension chain
wheel (18)
On EKI 2200/40, EKS 2400/40:
1. Unscrew and remove Phillips screw (18/1).
2. Remove the guide rail, turn it and screw it
back on using Phillips screw (18/1).
3. Projecting pin (18/2) defines the correct posi-
tion of the quick-tension chain wheel. Make
sure it is correctly seated.
Saw chain File diameter
(guide rail)
90PX040X
(104MLEA041)
91P045X
(120SDEA041)
91PX052X
(140SDEA041)

9 HELP IN CASE OF MALFUNCTION

CAUTION! Risk of injury. Sharp-edged
and moving appliance parts can lead to injury.
■
Always wear protective gloves during mainte-
nance, care and cleaning work!
■
Switch off the appliance and disconnect from
the mains power supply!
46
Top plate an-
gle (α)
Rotational an-
gle of the tool
4.5 mm 30°
5/32" 30°
5/32" 30°
Depth gauge setting
8.7

Chain maintenance table

Angles and dimensions: see figure (15).
WARNING! Danger of serious injury. Use
of an unapproved saw chain or guide rail on the
chain saw can result in serious injuries.
■
Use only approved saw chains and guide
rails.
Down angle Head tilt angle
(β) (γ)
Inclination an- Side plate angle
gle of the tool
0°
0°
0°
NOTE For malfunctions that are not listed
in this table or that you cannot resolve yourself,
please contact our customer service.
EKS 2000/35 | EKS 2400/40 | EKI 2200/40
Help in case of malfunction
Depth
gauge set-
ting (z)
75° 0.025"
85° 0.025"
85° 0.025"
File