ARIETE Vapor Plus Manual De Instrucciones página 10

other materials, especially velvet, which can become shiny very easily, cover them with a cloth and iron in one direction only,
using light pressure. The iron must be kept constantly moving over the fabric.
Label Ironing Iron
instructions
5 - 6
7
9
The mark on the label means "do not iron"
HOW TO STORE VAPOR PLUS ARIETE AFTER USE
- Switch off the iron by turning the thermostat knob to "MIN".
- Disconnect the plug from the outlet
- Let out all the residual steam by fully pressing push button (4).
- let the iron cool down.
- Unscrew the safety cap (1) by means of the provided cap remover (3), overturn the iron and pour any remaining water out
of the boiler (Fig. F). Be careful of the hot water to avoid burns. This allows to always keep the boiler tank well clean.
- When putting away the appliance at the end of the ironing session, do not screw the safety cap (1) down completely but
only by 3-4 turns.
- Turn the steam control knob in an anticlockwise direction until it stops
CLEANING
we suggest that these operations be carried out when water drops leaking out of the soleplate are noticed, and in any case
every 3 months.
- Before cleaning the iron, ensure it is disconnected from the power supply and has completely cooled down.
- Thoroughly flush the boiler.
- Do not use abrasives on the soleplate.
- Deposits and other residues on the soleplate can be removed with a rough cloth soaked in a vinegar / water solution.
- Keep the soleplate smooth: avoid hard contact with metal objects.
10
Kind of fabric Fibre material
synthetic Acrylic
modacryl
polypropylene
polyurethane
acetate
Triacetate
metallized cupro
Polyamide (nylon)
modal viscose
Polyester (rayon)
wool - silk wool
(steam or dry)
cotton cotton
(steam or dry)
linen linen
(steam or dry)