Before Assembly; Care And Maintenance - Regalo 2020 Manual Del Usuario

Before Assembly

A
B
D
F
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:
A
Mesh Wall
B
Upper Support Bar
C
Upper Support Bar
D
Bottom Support Bar A
Assembling Your Bed Rail
STEP 1
B
D
Insert the upper support bar (C) into the bottom support bar
(E). Make sure the spring pin fits securely into the opposing
hole so that the two pieces cannot pull apart. Repeat on the
opposite side (B, D) of the bed rail.
C
E
G
E
Bottom Support Bar B
F
Hinge Assembly A
G
Hinge Assembly B
C
E
BEFORE USING PRODUCT
Read and follow all instructions carefully to
ensure that your product is properly installed.
Failure to follow these instructions for the
assembly of use of your bed rail could result in
serious injury or death. The safety of your child
is your responsibility. Please keep these
instructions for your reference.
IMPORTANT
• Do not use two separate bed rails on one
bed. The bed rails will not function properly
and could be a safety hazard. Should you need
coverage on both sides of the bed, purchase
the Regalo Double Sided Bed Rail.

CARE AND MAINTENANCE

Periodically check the bed rail for signs of
damage, wear or for missing components. Do
not use if any part is missing, worn or damaged.
Check the bed rail regularly to make sure all
hardware and mountings are tight and secure.
Do not use abrasive cleaners or bleach when
cleaning. Proper cleaning of bed rail can be
done by sponging it with warm water and mild
detergent. Do not machine wash.
STEP 2
SPRING
PIN
SPRING
BUTTON
SECURED
With the upper and bottom support bars assembled, connect the
two sides.
NOTE: Make sure that the spring pins are secured into the
opposing holes so that the bed rail cannot pull apart.
English