Before Assembly; Care And Maintenance - Regalo 6010 HD Manual De Instrucciones

Before Assembly

B
D
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:
A
Mesh Wall (2)
B
Upper Support Bar (2)
C
Upper Support Bar (2)
D
Bottom Support Bar (2)
Assembling Your Bed Rail
STEP 1
B
D
Insert the upper support bar (C) into the bottom support bar
(E). Make sure the spring pin fits securely into the opposing
hole so that the two pieces cannot pull apart. Repeat on the
opposite side (B, D) of the bed rail.
A
B
F
D
C
E
E
Bottom Support Bar (2)
F
Right Hinge Assembly (1)
G
Left Hinge Assembly (1)
C
E
C
E
G
STEP 2
SPRING
BUTTON
With the upper and bottom support bars assembled, connect the
two sides.
NOTE: Make sure that the spring pins are secured into the
opposing holes so that the bed rail cannot pull apart.
BEFORE USING PRODUCT
Read and follow all instructions carefully to
ensure that your product is properly
installed. Failure to follow these
instructions for the assembly of use of
your bed rail could result in serious injury
or death. The safety of your child is your
responsibility. Please keep these
instructions for your reference.

CARE AND MAINTENANCE

Periodically check the bed rail for signs of
damage, wear or for missing components.
Do not use if any part is missing, worn or
damaged. Check the bed rail regularly to
make sure all hardware and mountings are
tight and secure. Do not use abrasive
cleaners or bleach when cleaning. Proper
cleaning of bed rail can be done by
sponging it with warm water and mild
detergent. Do not machine wash.
SPRING
PIN
SECURED
English