Hach NA5600 sc Na+ Instalación página 3

Table of Contents
1 Specifications on page 3
2 General information
3 Installation on page 11
Section 1 Specifications
Specifications are subject to change without notice.
Specification
Dimensions (W x H x D)
Enclosure
Weight
Mounting
Protection class
Pollution degree
Installation category
Power requirements
Operating temperature
Operating humidity
Storage temperature
Number of sample
streams
Analog outputs
Relays
on page 6
Table 1 General specifications
Details
Analyzer with enclosure: 45.2 x 68.1 x 33.5 cm (17.8 x 26.8 x 13.2 in.)
Analyzer without enclosure: 45.2 x 68.1 x 25.4 cm (17.8 x 26.8 x
10.0 in.)
Analyzer with enclosure: NEMA 4/IP65
Analyzer without enclosure: IP65, PCBA housing
Materials: Polyol case, PC door, PC hinges and latches, 304/316 SST
hardware
Analyzer with enclosure: 20 kg (44.1 lb) with empty bottles, 21.55 kg
(47.51 lb) with full bottles
Analyzer without enclosure: 14 kg (30.9 lb) with empty bottles, 15.55 kg
(34.28 lb) with full bottles
Analyzer with enclosure: wall, panel or table
Analyzer without enclosure: panel
1
2
II
100 to 240 VAC, 50/60 Hz, ± 10%; 0.5 A nominal, 1.0 A maximum;
80 VA maximum
5 to 50 °C (41 to 122 °F)
10% to 80% relative humidity, non-condensing
-20 to 60 °C (-4 to 140 °F)
1, 2 or 4 with programmable sequence
Six isolated; 0–20 mA or 4–20 mA; load impedance: 600 Ω maximum
Connection: 0.644 to 1.29 mm
2
0.812 mm (24 to 20 AWG) recommended, twisted pair shielded wire
Six; type: not powered SPDT relays, each rated at 5 A resistive,
240 VAC maximum
Connection: 1.0 to 1.29 mm
stranded recommended, 5–8 mm OD cable. Make sure that the field
wiring insulation is rated 80 °C (176 °F) minimum.
4 Preparation for use
A Appendix on page 37
2
(24 to 16 AWG) wire; 0.644 to
2
(18 to 16 AWG) wire; 1.0 mm
on page 37
2
(18 AWG)
English 3