Pan Detection; Residual Heat Indication; Booster Function; Timer - Foster OGNIDOVE Manual Del Usuario

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level chosen before.
After use, switch the heat element off: don't let the pan detection [ U ] active.

Residual heat indication

After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched without danger.
As far as the residual heat indicator is on light, don't touch the heating zone and don't put any
heat sensitive object on them. There are risks of burn and fire.

Booster function

The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones works during 10 minutes with an ultra high power. The
booster is foreseen for example to heat up rapidely big quantities of water, like nuddles cooking.
•
Start up / Stop the booster function:
Action
Increase power
Start up the booster
Stop the booster
•
Power management:
The whole cooking hob is equipped by a maximum of power. When the booster function
isactivated, and not to exceed the maximum power, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed ( [ 6 ] or [ 8 ] ).
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all 2 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
•
Setting and modification of the cooking time
Action
To select the heating zone
To select the power level
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking. The time is confirmed and the cooking starts.
•
To stop the cooking time
Action
To select « Timer »
To stop the « Timer »
If they are several timer activated you must repeat this operation.
Control panel
Press key [ + ] or [ - ]
Press key [ + ]
Press key [ - ]
The other heating zone:
[ 9 ] goes to [ 7 ] or [ 8 ] depending the type of zone
Control panel
Press key [ + ] or [ - ]
Press key [ + ] or [ - ]
Press key [ ]
Press key [ - ]
Press key [ + ]
Control panel
Press key [ ]
Press key [ - ] then [
24
Display
[ 1 ] to [ 9 ]
[ P ] during 10 min.
[ 9 ]
(example: power level 9)
Display
[ 4 ] or [ 9 ]
[ 1 ] ... [ 9 ]
[ 00 ] minutes
[ 30 ] to 29,28,27,...
The time increases...
Display
The remaining time
] Displays [ 00 ] then stops