Using The Cooktop; Pot Detection - Foster 7322 300 Manual De Instalacion Y Uso

using the cooktop

Switching the appliance on
Press the Power key to switch the appliance on.
All the displays relative to the cooking zones switch on in the standby position"0".
The control unit remains active for 20 seconds. If no cooking zone is selected
within this time, the appliance switches off automatically.
Switching the appliance off
To turn off the appliance entirely hold down the power key.
Switching the cooking zones on
To switch on a cooking zone press the corresponding Cooking Zone key then
adjust the heat setting using the [+] key and [-] Key within 10 seconds. The
heat level of each single cooking zone can be set in 9 different positions and
will be shown in the corresponding cooking zone display with a number ranging
from ''1'' to ''9''. Press the [+] key to increase the heat level, press the [-] key
to decrease it.
Switching the cooking zones off
To switch a cooking zone off select it and bring its heat level back to ''0'' by
pressing the [-] key.

Pot detection

Each induction cooking zone has a pot detection minimum limit, which
varies according to the material of the cookware being used.
For this reason, you should choose the cooking zone which is most suitable for
the diameter of the cookware you are going to use.
0 4
If the symbol appears on the cooking zone display, it means that:
• The cookware used is not suitable for induction cooking.
• The cookware diameter is smaller than the one allowed by the hob.
• No cookware is on the cooking zone.
For more details about this feature refer to chapter ''induction cooking".
Residual heat
If the temperature of the cooking zone is still high (over 50°) after it has been
switched off, the relative display will indicate the symbol ''H''(residual heat).
The symbol will stay on even when the appliance is switched off and will only
switch off when the burn risk in no longer present.
9