Mitsubishi Electric Lossnay PZ-61DR-E Manual De Instrucciones página 23

4
Weekly timer
Mon Tue Wed Thu Fri Sat Sun
No.
Input display:
day
F1 F2
5
Weekly timer
No.
Select:
Cursor
F1 F2
Weekly timer
Changes saved
Day selection:
Navigating through the screens
week selection screen .......... SELECT button
1/2
Select Page
F3 F4
1/2
Thu
8:30 On
20:00
Off ----
22:00
----
----
Content
F3 F4
Thu
........ RETURN button
The weekly timer setting screen will appear and
the current settings will be displayed.
Up to eight operation patterns can be set for
each day.
Move the cursor to the desired day of the week
with the F1 or F2 button, and press the
F3 button to select it. (Multiple days can be
selected.)
Press the SELECT button.
Operation pattern setting screen will appear.
Press the F1 button to move the cursor to the desired
pattern number.
Move the cursor to the time, On/Off/Night-purge (
or fan speed (
Change the settings with the F3 or F4 button.
Time: settable in 5-minute increments
* Press and hold the button to rapidly advance the numbers.
On/Off/Night-purge
Fan speed: Selectable fan speed of the Lossnay connected.
Note:
Lossnay will start the operate at the same ventilation
mode before stopping.
How to set Night-purge schedule
<STEP 1>
Enable the Night-purge function setting and select the fan
speed during Night-purge (Refer to the Lossnay Installation
Manual, function setting).
<STEP 2>
Set the "Night-purge schedule"
after "Off schedule" like the
example on the left. Off setting
is necessary before Night-purge
setting. If not, Night-purge does
not start. For example, the setting
as shown in the right is incorrect.
Note:
Fan speed can be selected by function setting, but cannot be
selected in the Weekly timer. If you change fan speed during
Night-purge by the remote controller, Lossnay follows it.
If the Night-purge function is not enabled, Lossnay will
not operate properly even if it is set in the Weekly timer.
Night-purge operation is always Bypass ventilation mode.
Press the SELECT button to save the settings.
A confirmation screen will appear.
)
)with the F2 button.
Weekly timer 1/2
Thu
8:30 On
No.
22:00 ----
----
----
Select:
Cursor Content
23