PNI PT949S Manual Del Usuario página 6

EN
Light Sensor/Photoresistor: Helps for image brightness adjustments when night falls and in dark areas;
Switch surveillance camera to pairing mode
Press and hold the reset button for 8 seconds to reset the surveillance camera to default settings. The
surveillance camera will confirm enter pairing mode with blue led blinking and a vocal message: "The
surveillance camera is now ready to begin pairing"
Reset surveillance camera
In standby mode, press and hold the reset button until you hear the voice prompt: Reset successfully.
4.2 QR code net-pairing (Recommended)
The product only supports a 2.4GHz Wi-Fi network. It does not support a 5GHz Wi-Fi network. Before
configuring Wi-Fi, please check and confirm you have a 2.4 GHz network, and activate GPS Location on your
phone. The Wi-Fi password should not contain special characters of ~!@#$%^&*(). When configuring Wi-Fi,
make sure your router, mobile, and device are as close as possible for a quick configuration of the device.
Connect the smartphone to this Wi-Fi 2.4 GHz router with internet access. Activate GPS location from phone.
If any of these conditions are not met configuration will fail.
● App supports QR code net-pairing and Wi-Fi connection. You can choose to add devices by other options.
● Power On the surveillance camera, and start "Pairing mode" following the described procedure
● With a mobile phone connected to Wi-Fi, click "Add Device" or "+" icon (figure 1) on the Home screen of the
App, select "Security & Sensor"(figure 2)→ "Smart Surveillance camera", click "next step" (figure 3).
Check the WiFi Network name on the screen and enter the wireless password. Click "Confirm" to continue
(figure 4).
Figure 1 Figure 2
● Hold the mobile phone screen in the front of the surveillance camera (figure 5), the distance between the
two should be 15 to 20 cm. (figure 6) Try not to shake the mobile phone during the scanning.
6