Overload Indicator; Maintenance And Care - Joycare JC-462 Manual De Instrucciones

example
Hold the ON/TARE button down to switch the scale off , if you do not want to wait for the
automatic switch off function.
Negative tare
The tare is displayed as a negative number, when all the weight is removed from the
device (including the container). Press the button ON / TARE: again to reset the product.

Overload indicator

When the weight exceeds the scale capacity (5 kg), the display shows: "EEEE". Remove the
excessive weight immediately in order to avoid product damages.
Warnings:
Always select an area with adequate natural or artificial light before using the solar
kitchen scale.
Do not expose it to direct sunlight to avoid possible damages.

MAINTENANCE AND CARE

Place always the product on a flat and stable surface. Please clean the appliance with a
damp and soft cloth avoiding any water seepage inside the scale. Do not use chemical
detergents. Never deep the product into water. Avoid shaking, dropping or shocking the
scale. This is a precision instrument and must be handled with care. Never try to repair the
scale by yourself but always address to specialized centers; otherwise, the warranty will
be not valid anymore. It is advisable to store the scale in a clean place. Dust, dirt, moisture,
vibration, air currents, can all cause an adverse effect on the reliability and accuracy of
your scale. When the unit is not used for a long period of time, it is advisable to remove
battery, as their leaking can damage the appliance. When the scale is switched off, never
place or lay any objects on it.
ATTENTION
Use this product only for its intended purpose, as described in this instruction manual such
as an electronic scale for domestic use only. Any other use should be considered improper
and dangerous.
Packaging components (plastic bags, cardboard, polystyrene etc.) must be kept out of
the reach of children as they have the potential to be dangerous and their disposal should
5