Lelit Elizabeth Manual De Instrucciones página 16

VIP Line - Elizabeth - PL92T
H.2 When steam comes out, close the knob (10), place a jug with the beverage to be
foamed under the steam wand (12), re-open the steam knob (10).
H.3 When the desired result has been achieved, close the steam knob (10) turning
it clockwise.
Note.
function if the steam function has not been used for a certain period.
16
Note.
Caution.
to the cup-holding grate and dispensing some steam. Thoroughly clean the wand (12) with
a sponge or clean cloth. In the chapter "Cleaning and maintenance", you will find all the
necessary advice.
I
Hot water distribution
I.1 Place a jug under the hot water nozzle (5) and press the hot water switch (4).
I.2 When the desired amount has been reached, press the hot water switch (4) to
stop dispensing.
Note.
function after a predetermined time. To withdraw more water, repeat the "Dispense hot
water" operation.
for experts
Adjusting the LCC settings
The LCC - Lelit Control Center (11) has pre-set default settings. Here you can
discover how to adjust them.
J
Changing the factory settings
J.1 Press the "-" button to enter settings mode, and scroll through the menu.
J.2 Press "+" to change the setting. The setting flashes.
J.3 Change its value and/or state by using the "-" and "+" buttons.
J.4 3 seconds after the last press of a button, LCC stores the data and exits from
settings mode.
The machine, thanks to its electronic controls, returns to the coffee/water
See chapter 06 "The art of Espresso coffee" for the best way to froth milk.
Clean the steam wand (12) after every use by pointing the steam wand
The machine is equipped with an electronic control that stops the water