After Use; Cleaning And Maintenance; Information For Users - Termozeta Anti-Calc 7700 Professional Libro De Instrucciones

• Set the dry ironing function.
• Fill up the tank up to MAX level
• Make the iron function as normal bringing the plate to the maximum temperature.
• Disconnect the plug from the current socket when the iron is ready.
• Holding down the self-cleaning button (10) wag the iron in horizontal position,
above a sink or a basin. Let the tank get empty.The water-steam mixture will
eliminate a part of limestone residues present in the plate.
• Afterwards connect the plug to the current socket and moving the iron above an
old cloth, eliminate all the residue water present in the plate..
Important:
• Pay attention not to get in contact with the water that is comes out from
the plate since it is bowling and you could get burned.
Note:
• Before re-using the iron to iron the clothing, pass the cold plate on a dry cotton
cloth.

AFTer use

• Disconnect the plug from the current socket.
• Empty the tank.
• Always put the steam adjustment command (4) in dry ironing position.
• Leave the iron to completely cool down.
• Place the iron in vertical position.

CLeANING ANd MAINTeNANCe

• Before effectuating any cleaning operation, disconnect the plug from the
current socket and wait until the iron is completely cooled down.
• Clean the body of the iron only with a soft and dry cloth.
• Regularly clean the plate using a normal non abrasive sponge in order not to
ruin the plate surface.
• Don't use chemical or abrasive substances.
• Don't ever emerge the appliance in water or other liquid substances.
Termozeta S.p.A. reserves the right to introduce technical and/or aesthetic
changes to its products intended to improve performances.
Termozeta is an international trademark. Copyright © 1995. All rights reserved.
Termozeta S.p.A. - Via Magenta, 41/43 - 20010 Bareggio (MI) Italy
••• UNITED KINGDOM

INFOrMATION FOr users

In accordance with european directives 2002/95/Ce, 2002/96/
Ce and 2003/108/Ce on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their
waste disposal.
• The barred symbol of the rubbish bin shown on the equipment indicates that,
at the end of its useful life, the product must be collected separately from other
waste.
• Therefore, any products that have reached the end of their useful life must be
given to waste disposal centres specialising in separate collection of waste
electrical and electronic equipment, or given back to the retailer at the time of
purchasing new similar equipment, on a one for one basis.
• The adequate separate collection for the subsequent start-up of the equipment
sent to be recycled, treated and disposal of in an environmentally compatible
way contributes to preventing possible negative effects on the environment
and health and optimises the recycling and reuse of components making up
the apparatus.
• Abusive disposal of the product by the user involves application of the
administrative sanctions according to the laws in force.
• • • eNGLIsH