Tank Filling - Termozeta Anti-Calc 7700 Professional Libro De Instrucciones

INsTruCTIONs FOr use
INSTRUCTIONS FOR USE
DESCRIPTION OF STEAM ADJUSTMENT CONTROL (4)
DESCRIPTION OF STEAM ADJUSTMENT CONTROL (4)
Chart A
POSITION
GUIDE FOR IRONING
Chart B
max ••• Ironing using steam at high temperature (cotton, linen)
•• Ironing at medium temperature (wool, silk)
• Ironing at low temperature (synthetic fibres)

TANK FILLING

TANK FILLING
• Always proceed with this operation with the plug disconnected from the current
• Always proceed with this operation with the plug disconnected from the
socket.
current socket.
• Make sure that the steam adjustment command (4) is in the position of dry ironing (see
• Make sure that the steam adjustment command (4) is in the position of dry ironing
chart A).
(see chart A).
• Open the cover (2) and fill the tank through the appropriate hole without exceeding
• Open the cover (2) and fill the tank through the appropriate hole without exceeding
MAX level (11) indicated on the tank itself. Don't ever put inside the tank any
MAX level (11) indicated on the tank itself. don't ever put inside the tank any
perfumed substances.
perfumed substances.
• Close the cover (2).
• Close the cover (2).
Advice:
Advice:
If water if your area is particularly calcareous it is advisable to use distilled water.
If water if your area is particularly calcareous it is advisable to use distilled water.
OPERATING INSTRUCTIONS
OPerATING INsTruCTIONs
• Check that the steam adjustment command (4) is in the position of dry ironing (see
• Check that the steam adjustment command (4) is in the position of dry ironing (see
chart A).
chart A).
• Completely unroll the feeling cable (7), put the iron in a vertical position and connect
• Completely unroll the feeling cable (7), put the iron in a vertical position and connect
the plug to the current socket.
the plug to the current socket.
• With the temperature adjustment knob (9) select the temperature suitable for the type
• With the temperature adjustment knob (9) select the temperature suitable for the type of fabric to iron (see chart B).
• Thermostat indicator (8) switches on and will switch off when the plate has reached
of fabric to iron (see chart B).
the selected temperature. At this point the iron is ready for use.
• Thermostat indicator (8) switches on and will switch off when the plate has reached
the selected temperature. At this point the iron is ready for use.
Importante:
• Before and during use, make sure that the work surface is stable and heat
Advice:
resistant.
• Iron firstly more delicate fabrics which require low temperature and then more
• Never leave the iron unattended when it is plugged into the power supply outlet.
resistant ones which require higher temperature;
• Do not use the iron if it has accidentally been dropped or if it has visible signs
of water loss.
• Before starting with ironing pass the iron over a small internal area of your item of
clothing to make sure that the selected temperature is suitable for that type of fabric.
Advice:
• Iron firstly more delicate fabrics which require low temperature and then more resistant
ones which require higher temperature;
FUNCTION
DRY
IRONING
STEAM
IRONING
STEAM
IRONING
• • • eNGLIsH
•
FIGURE DESCRIPTION
NO STEAM
STEAM
LEVEL:
MEDIUM
STEAM
LEVEL:
MAXIMUM
• • ENGLISH