Dry Ironing - Termozeta Anti-Calc 7700 Professional Libro De Instrucciones

• • • eNGLIsH
sTeAM IrONING
• Fill the tank with water.
• Through the steam adjustment command (4) choose the desired steam supply
(see chart A).
Note
• When the iron is placed vertically during the ironing pauses the steam supply is
automatically cut off.
• When used for the first time, some water drops can come out together with the
steam. This is to be considered normal. Before ironing you clothing do some
tests on an old cloth.

drY IrONING

• Put the steam adjustment command (4) in position of dry ironing.
sPrAY FuNCTION
• This function allows to wet the clothing during both steam and dry ironing.
• To activate it push several time the spray button (6) e direct the water jet onto
the most resistant creases.
suPer-sTeAM FuNCTION
• Push several the super steam button (5): the iron will supply an instantaneous
high power steam jet.
Note:
• Don't consecutively push the button too many times to avoid coming of non
steamed water drops.
• Use this function only with the temperature adjustment knob (9) set up to the
steam function.
• When the super steam is used for the first time, some limestone scales could
come out so we advise you not to discharge the first steam jets directly onto
the clothing.
VerTICAL IrONING
To "liven up" the clothes hung on coat hangers, curtains etc. you can vertically
use the iron:
• Set the temperature adjustment knob (9) on Max indication.
• Hold the iron in vertical position at a distance of about 15-20 cm from the fabric.
• Push the super steam button (5) several times.
Note:
• Don't consecutively push the button too many times respecting the pauses of
some seconds between one operation and another after.
Important:
• Don't use this function on fabrics made of synthetic fibres.
• Maintain an adequate distance between the fabric and the ironing plate to avoid
burnings.
• Use this function exclusively on clothes hung on coat hangers. Don't ever
try to iron the clothes worn by a person: the steam is very hot, you could
cause serious burning.
seLF-CLeANING sYsTeM
Your iron is supplied with a self-cleaning system which allows to reduce the
formation of limestone deposits. In order that it produces its benefits it is
necessary to regularly effectuate the operation, al least once a month. Proceed
as following: