After Use; Cleaning And Maintenance - Termozeta 103025 Libro De Instrucciones

SELF-CLEANING SYSTEM
Proceed as following:
• Set the dry ironing function.
• Fill up the tank up to MAX level
• Make the iron function as normal bringing the plate to the maximum temperature.
• Disconnect the plug from the current socket when the iron is ready.
• Holding down the self-cleaning button (7) wag the iron in horizontal position, above a
sink or a basin. Let the tank get empty. The water-steam mixture will eliminate a part
of limestone residues present in the plate.
• Afterwards connect the plug to the current socket and moving the iron above an old
cloth, eliminate all the residue water present in the plate.
Important:
Pay attention not to get in contact with the water that is comes out from the plate
since it is bowling and you could get burned.
Note:
Before re-using the iron to iron the clothing, pass the cold plate on a dry cotton cloth.

AFTER USE

• Disconnect the plug from the power outlet.
• Empty the tank.
• Always set the steam control dial (4) to the "0" position.
• Let the iron cool down.
• Wind the cord around the rear part of the appliance.
• Place the iron in a vertical position.

CLEANING AND MAINTENANCE

WARNING!
Before carrying out any cleaning operation, disconnect the plug from the power
outlet and wait for the iron to cool down.
• Clean the iron body only with a soft and dry cloth.
• Clean the soleplate using a non-abrasive sponge in order not to damage the soleplate
surface.
• Do not use chemical or abrasive substances.
• Do not immerse the appliance in water or other liquid substances.
ENGLISH
Your iron is supplied with a self-cleaning system which allows
to reduce the formation of limestone deposits. In order that it
produces its benefits it is necessary to regularly effectuate the
operation, at least once a month.