Environmental Protection, Disposal; Switching On The Unit - AL-KO 3538 P E-flor Traducción Del Manual De Instrucciones Original

GB
People not allowed to use the appliance:
People not acquainted with the operating
instructions, children, juveniles who have not
yet reached the minimum age for using this
appliance, and people under the influence of
alcohol, drugs or medication are not allowed to
use the appliance.
Operating times:
Please observe the operating hours permitted
locally.
Environmental protection,
disposal
Packaging material for recycling can be dispo-
sed of at the corresponding collection points.
Assembly
Assemble this unit in accordance with the
separately enclosed assembly manual.

Switching on the unit

Do not switch on the unit until it has been com-
pletely assembled.
The numeral printed on the left before the
i
3
text (e.g. ) refers to the diagrams.
Always comply with the petrol engine operating
manual supplied by the engine manufacturer.
Before switching on the machine for the first
time, fill up with oil and petrol!
Petrol: Standard petrol – lead-free
Engine oil: See operating manual supplied by
the engine manufacturer.
GB 3
Filling up with petrol:
The tank cover is situated on the petrol tank
and is identified by the symbol "petrol pump"
(petrol station).
Filling up with oil:
Capacity approx. 0.6 litres
Engine with dipstick:
Fill up to the mark between "MIN" and
"MAX" on the dipstick.
The oil level is checked with the dipstick scre-
wed in.
Setting the working depth
Only with the motor switched off and the blade
shaft at a standstill.
Set the working depth of the blade shaft
1
on the dial.
Positions on the dial:
N = neutral ➔ operating/transport position
1 – 6 = setting of the working depths
With new blades, set the dial to position 2 at
the most.
Select the working depth depending upon the
wear of the blades and the state of the lawn.
If the motor does not pull through or even
stops in aerating, the wrong working depth has
been selected.
Turn the dial back to the lowest working depth.
The motor must turn evenly.
Adjustment level per step: 3 mm