Set To Default Configuration; Sntp Setting Function - Ansel 7005 Manual Del Usuario

. Changing the Administrator Password
For security reasons, we strongly recommend that you set an administrator.
password for the router. On first setup the router requires no password. If you don't set
a password the router is open and can be logged into and settings changed by any user
from the local network or the Internet.
. Click Access Control Setup, the following screen will open.
(Guest account , if you use guest account login , you only can view gateway setting, not
change and configure any gateway setting, else you login by Admin account)

4.3.3 Set To Default Configuration

. If you want to reboot the router using factory default configuration, click "Apply" then reset the router' s settings to default values.
. Click System Information Display to open the Online Status page. In the example, on the following page, both PPPoE connection is up on the WAN
interface, H323 Status, MAC address, Register Status, etc....

4.3.5 SNTP Setting Function

Intelligent Networking & Internet Solutions
www.ansel.com.mx
73