Ansel 7005 Manual Del Usuario página 67

SIP Proxy Server 1. Enter the SIP service IP address or domain name in this field (the domain name that comes after the @ symbol in a full SIP
Setting URI). 2. Use Net2Phone Service Provider
SIP Domain 1. Enter the SIP realm in this field
This field sets how long an entry remains registered with the SIP register server. The register server can use a different time
Register Interval
period. The Gateway sends another registration request after half of this configured time period has expired.
Setting
SIP Authentication Enable or Disable MD5 Authentication with SIP Proxy Server
Symmetric RTP: default use Nat pass function.
STUN Client: setting your STUN server information, default STUN server is FWD STUN server.
Outbound Proxy Support: Setting your Outbound Proxy server information.
Local SIP Port:: setting local use SIP port, default is 5060.
SIP VoIP Advanced Configuration
There are many SIP VoIP, Codec and other more detail Setting, you can set in "Advance Setting". For SIP and H.323, there are a little
different in advance setting. There are 3 different parts to setting about VoIP, Telephone and network.
Item Description
After the VoIP call is connected, when you dial a digit, this digit is sent to the other side by DTMF tone. There are three methods of
DTMF Relay
sending the DTMF tone. The first one is "in band", that is, sending the DTMF tone in the voice packet. The second one is "RFC2833",
for SIP:
that is, sending the DTMF tone as a RTP payload signal. The third one is "SIP Info", that is, sending the DTMF tone as a SIP signal.
Sending DTMF tone as a signal could tolerate more packet loss caused by the network. If this selection is enabled, the DTMF tone will
be sent as a signal.
Intelligent Networking & Internet Solutions
SIP Proxy Server Label
[VoIP Advance]
www.ansel.com.mx
67