Ansel 7005 Manual Del Usuario página 71

Hot Line:
You can setting hot line. when the call incoming the hot line port, it will call hot line number automatically. The hot line call the number via VoIP, so
you setting the hot line number must VoIP number. Usually, you want to incoming GSM calls transfer to FXS, you only setting the GSM hot line to FXS
number.
. Port number: Input FXS/GSM want to call hot line number. The call will be via VoIP, so the number must be the VoIP number.
Port Status:
Each of port show status table. you can view all port status. Like on/off hook , caller/callee IP, duration , and packet loss.
.
Port Status Display:
This selection will display concurrent call status of this Gateway. The status information of each voice channel includes codec, dialing number and
destination IP address. The status is refreshed every 3 seconds.
Call Priority:
Gateway have a rule for call Priority, up to down is 1)Hot Line 2)Dialing plan 3)Registered server(SIP Proxy / H.323 Gatekeeper).When a VoIP call is
made the Gateway will process by Hot Line first, then it will check the dialing plan table, last fine Server(SIP/H.323).
For example: if I have a gateway and It is registered a proxy server, I don't setting any others (Hot Line or dialing plan.). when I make a VoIP call,
gateway will check Proxy server. Now I setting 1~2 dialing plan, and registered proxy server. When I call,
Intelligent Networking & Internet Solutions
www.ansel.com.mx
71