Installation - Ansel 7005 Manual Del Usuario

CD ROM
CD Include in all product user manual and datasheet.
RJ-45 cable
Internet cable RJ-45 connect to NIC/Gateway/Router
Antenna
This Antenna frequency is 900MHz/1800,1900Mhz for automobile.
Power supply
Power Supply,input:100-240V output:+12V (Europe/UK/US)

2.2 Installation

1. Install Gateway
1 Connect the 12V DC IN to the power outlet with power adaptor.
2 Connect Line to PSTN Line.
3 Connect Phone port to a telephone jack with the RJ-11 analog cable (Phone / PBX
Trunk Line.)
4 Connect the antenna to the Antenna Connector.
5 Insert SIM card to the gateway
6 Power On
Warning: to avoid the product damaged, please insert SIM card before
power-on, and power-off first if it is necessary to take SIM card out of the
product.
2. Setting up the network environment for configuration
-To be able to enter the configuration system via web or telnet.
1. Connect the Ethernet cable (with RJ-45 connector) to WAN port.
GSM Gateway ----- RJ45 directly link ----- PC
Intelligent Networking & Internet Solutions
www.ansel.com.mx
47