Setup; Factory Default Setting; Setting Up Network; Telnet - Ansel 7005 Manual Del Usuario

2.3 Setup

There are 2 way to setting gateway - Web User Interface, Telnet

2.3.1 Factory Default setting

. WAN Port IP address : 192.168.1.1 . Default login authentication username : admin, password : admin
ANSEL MODELO 7005 only (VoIP feature)
. VoIP Number Port_1~Port_2 number:100,200
and G.723 codec.

2.3.2 Setting Up Network

Checking the Network IP Configuration
The following explains how to setup the Transmission Control Protocol/Internet Protocol (TCP/IP) in Windows 2000/XP. For more detailed information
on TCP/IP setup, refer to the Windows 2000/XP help files. For other operating systems refer to the user manuals.
1. On the desktop, Please enter start -> control panel -> network setting." Click Properties. The Network screen will open.
(Your particular system will be different from the screen shown here.)
Check that you have an Ethernet network card installed. If not, refer to the card manufacturer's documentation and install the card and
drivers.
If your card is installed,
1 Click the Add button. The Select Network Component Type dialog box will open. The box will show four options: Client, Adapter, Protocol, and
Service.
2 Select Protocol and click the Add button. The Select Network Protocol dialog box will open.
3 Select Microsoft in the left scrolling window then selects TCP/IP in the right, and click OK.". You will be returned to the Network dialog box.
. VoIP default setting was H.323 signal protocol, Direct Mode, Fast-Start
Intelligent Networking & Internet Solutions
www.ansel.com.mx
49