Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Item
Description
If this function is enabled, when VoIP call is occurred, the other data will be automatically reduced traffic which across the
Smart-QoS:
internet in order to guarantee the voice bandwidth.
You can configure your bandwidth what the Max byte of download and upload of ADSL modem rate.
Bandwidth control:
Setting G.723 / G.729 voice compression size. Quality and Packet size can adjust by you want.
G.723/G.729
Bandwidth:
IP TOS:
Some Router support TOS(Type of Service), when you enable the TOS function, the router will process those packets
firstly.(default is disable)
4.2.2 SIP Setup (Peer to Peer)
Gateway SIP support SIP(RFC3261), SDP(RFC2327), RFC2833, STUN(RFC3489), Symmetric RTP, outbound proxy, ENUM(RFC2916),and
RTP/RTCP.SIP NAT pass through Function can support 80% NAT/Firewall that you don't setting DMZ/Virtual server in router or Firewall.
1
Select "SIP Protocol"
2
SIP number / account (username) and Password Setting: Please fill out the SIP account including username / password from ITSP. (Note:
support digits and character base SIP Account / username, some SIP Server use character username to login, and a number to call number( ie.
VoIPBuster) , if your server don't support this, number/Account are the same, please input the same username )
.
Number: Input SIP Number (Username), if your server support account and number (different),input the number, else number/account are the
same username.
.
Reg: let your sip account register SIP Server, click this option.
.
Account: Input SIP account(Username), if your server support account and number (different),input the number, else number/account are the
same username.
.
Password: Input Password that ITSP support.
.
Use Public Account: This allows gateway to use single SIP account for multiple ports. User input the only one account in port one field for
registering the ITSP.
1
SIP Proxy Server setting, setting SIP proxy server register information. (If user does not need register SIP Proxy Server, Please go to Dialing
Plan Policy)
2
If your gateway under the NAT/Firewall, you should setting different NAT Pass function. if you setting STUN/Outbound Proxy, you should
have a STUN/Outbound proxy server. If they can't pass NAT or one way talk happen, try to open "DMZ" and virtual server "5060" port in router.
Intelligent Networking & Internet Solutions
www.ansel.com.mx
66
Capítulos
Tabla de contenido
