Initialization - Motorola IMPRES NNTN8845 Guia Del Usuario

Table 1: IMPRES Battery Charging Indicators
Status
Green for approx. 1 sec
Power On
Steady red
Charging
90% Charged Blinking Green
Fully
Steady Green
Charged
Calibration Steady Amber
Blinking Red
Fault
Standby Blinking Amber
End of
Alternating Red/Green
Service Life
Recalibration Alternating Amber/Green

Initialization

In order for the features of Motorola IMPRES batteries and the
Adaptive Charging System to be fully available, the data contained in
Motorola IMPRES batteries must be initialized by the charger the first
time it is charged. This process is indicated by a Steady Orange light
on the charger indicator (the same as if the battery were
LED Status
5
Comments
Successful charger power-up
Battery in rapid charge mode
Battery is charged to 90% or
greater capacity
Battery is nearly charged or fully
charged
Battery is in recondition or
calibration mode
Remove and re-insert radio or
battery
Battery is waiting to rapid charge.
Battery may be too hot, too cold, or
low voltage.
Battery continues to be usable but
may be nearing the end of its rated
service life
As soon as possible, enable
Calibration and calibrate the
battery