Common Operations; Turning On Or Off The Power; Canceling The Demonstration; Turning On Or Off The Key-Touch Tone - JVC CA-HXZ9 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Common Operations

Turning On or Off the Power

To turn on the unit, press
STANDBY/ON
on the remote control)
so that the lamp on the button goes off.
To turn off the unit (on standby), press
(or STANDBY/ON
on the remote control)
again so that the lamp on the button lights up.
• A little power is always consumed even while
the unit is on standby.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The clock is reset to "0:00" right away, while the tuner preset
stations (see page 13) will be erased in a few days.

Canceling the Demonstration

When connecting the AC power cord into a wall outlet, the
unit automatically starts the demonstration.
To cancel the demonstration, press and hold
CANCEL/DEMO until "DEMO OFF" appears
on the display.
• To cancel only beep sounds during the
demonstration, press BEEP ON/OFF on the
remote control.
When you press other buttons
The demonstration stops temporarily. It will start automatically
again (if no operation is done for 2 minutes) unless you cancel it by
pressing CANCEL/DEMO.
To start the demonstration manually
Press and hold CANCEL/DEMO again until "DEMO START"
appears on the display.

Turning On or Off the Key-touch Tone

If you do not want the key-touch tone to beep each time you
press a button, you can deactivate it.
On the remote control ONLY:
Press BEEP ON/OFF.
9
(or
CANCEL / DEMO
BEEP
ON/OFF
BEEP
ON/OFF
• Each time you press the button, the key-touch tone turns on
("BEEP ON") and off ("BEEP OFF") alternately.
BEEP OFF
Saving the Power Consumption while on Standby
—Ecology Mode
You can save the power consumption while the unit is turned
off (on standby).
• You can set Ecology Mode whether the unit is on or off.
On the unit ONLY:
To activate the Ecology Mode, press ECO.
"ECO" appears on the display for about 2 seconds
(and the demonstration is canceled if you have
pressed the button while the unit is off).
To deactivate the Ecology Mode, press ECO again.
"NORMAL" appears on the display for about 2 seconds.
• Each time you press the button, "ECO" and "NORMAL"
appear alternately on the display.
When you turn off the unit with Ecology Mode activated
"ECO" flashes on the display, and the clock time will not be shown
while the unit is turned off.

Selecting the Sources

To listen to the FM/AM broadcasts, press FM/AM.
(See page 13.)
To play back discs, press CD 3¥8. (See pages 14 – 18.)
To play back tapes, press TAPE 2 3. (See page 19.)
To select the external equipment as the source, press AUX.
CD
FM / AM
When you press the play button for a particular source
(FM/AM, CD 3/8, TAPE 2 3, and AUX), the unit turns on
and the unit starts playing the source if it is ready.
BEEP ON
ECO
TAPE
AUX
Tabla de contenido
loading

Tabla de contenido