Waeco CoolAir CA-1000-AC Instrucciones De Montaje Y Uso página 43

_CA-1000.book Seite 43 Freitag, 28. Juli 2006 10:35 10
CoolAir
✓ The set value is saved and is then used when the system is restarted.
✓ You are now in menu level 4 and can use the + and - buttons to switch
5.3.6 Menu level 5: Default setting
You can return the parameters you set in configuration mode on menu
levels 1 to 4 to the default settings:
➤ Start configuration mode (see chapter "Start and end configuration
✓ The first digit of the display (see fig. 15 on page 7, 5) shows the menu
➤ Press the + button (see fig. 15 on page 7, 6) four times to switch to
✓ The digital display shows
➤ Press the Mode button (see fig. 15 on page 7, 4) to return the system
✓ The digits in the display
➤ Press the + button.
✓ The digital display shows
➤ Press the Mode button (see fig. 15 on page 7, 4) to confirm your
✓ The parameters set in configuration mode are returned to the default
✓ You are now in menu level 5 and can use the + and - buttons to switch
between menu levels.
mode" on page 40).
level and the second and third show the parameter which can be set.
menu level 5.
to its default settings.
entry.
setting.
between menu levels.
.
00
flash.
00
.
01
Installation
43