Optional Features - Ferroli OPERA Serie Instrucciones De Uso

- Parameters
Each system requires a different parameterisation. Follow the access procedure given below.
"System Type Menu"
Change parameter P.01 of the "System Type Menu" to 4.
Change parameter P.09 of the "System Type Menu" to 1.

- Optional features

In addition to the electrical connections of the previous figure (necessary for this system configuration) there are options
that do not require settings.
Legend
139 Remote Control: it can be installed in place of 72 to manage the request of the 1st zone (direct)
300 Burner On indication (voltage-free output): the example shows the connection of an hour counter at 230Vac
301 Fault indication (voltage-free contact output): the example shows the connection of a lamp at 230Vac
302 Remote reset input (230Vac): the example shows the connection of a double-pole switch at 230Vac, allowing the resetting of a
block type fault
357 Fault indication (230Vac): the example shows the connection of a lamp at 230Vac
144
J2 J1
fig. 37
cod. 3541R960 - Rev. 00 - 09/2019
J3
OPERA
EN