Ferroli OPERA Serie Instrucciones De Uso página 126

MAINTENANCE
Test mode
Service Information
Service Intervention Date
SETTINGS
Language
Unit of Measure
Set Date
Set Time
Indication during operation
Heating
A heating demand (generated by the Room Thermostat, Remote Timer Control or 0-10 Vdc signal) is indicated by ac-
tivation of the circulating pump and by the hot air above the radiator (fig. 2).
Configuration "Heating only/Double circulating pump"
23°C
Thursday 9 Jan. 2014 11:25:40
DHW (with optional hot water tank installed)
A hot water tank heating demand is indicated by activation of the drop under the tap (fig. 4 and fig. 5).
Configuration "Double circulating pump"
23°C
Thursday 9 Jan. 2014 11:28:22
126
Test mode
Gas Type Selection
Cascade Test Mode
See "Service Information" on page 134
See "Service Intervention Date" on page 134
--
fig. 2
32°C
fig. 4
cod. 3541R960 - Rev. 00 - 09/2019
See fig. 62
See fig. 57
See "CASCADE TEST mode activation" on page 164
See fig. 7
See fig. 8
See fig. 9
Configuration "Circulating pump and 3-way valve"
23°C
Thursday 9 Jan. 2014 11:25:40
Configuration "Circulating pump and 3-way valve"
23°C
Thursday 9 Jan. 2014 11:29:27
OPERA
/
32°C
fig. 3
32°C
fig. 5
EN