Select A Language; Show Binding Information; Change Binding Parameter Settings; Status Indicators - HellermannTyton AT2000 CPK Manual Del Usuario

8.3.2 Select a language

f Open the drop-down
L a n g u a g e
f Select the language.
; The setting immediately changes to the language you
selected.
In the measurement environment the column headings do
not change until the next restart of the software.

8.3.3 Show binding information

Binding information shows the process data of the last
binding performed with the AT2000 CPK in connected
status.

8.3.4 Change binding parameter settings

f Change the settings for the
parameters.
; The parameter settings are changed and the new
settings are transmitted to the AT2000 CPK.
If force level and/or quality are changed at the
AT2000 CPK, the new values are uploaded to the
HT Data Management software, à "Force level" on
page 13 and à "Quality" on page 14.
f Click on the
Refresh button.
; The settings from the AT2000 CPK are uploaded to the
HT Data Management software.

8.3.5 Status indicators

Colour
Connection to the Green
power pack CPK
Red
Connection to the Green
AT2000 CPK
Red
Status, tool Green
Yellow
Blue
Red

8.3.6 Synchronising time and date

f Click on
Synchronise with PC
; Clock time and date of the power pack are synchronised
with the PC connected to the device.
Time and date are saved in the power pack and have to be
rechecked if the power pack is subsequently changed.
Operating Instructions • AT2000 CPK • 02-2017 • v02 • 106-29004
menu.
Force level and/or Quality
Status
Connection active
Error message active
Connection active
Error message active
Ready
Busy
Main menu on tool active
Binding not possible
Error message active
time.
HT Data Management
17